Installation
Please refer to the section that corresponds to your version of the Windows operating system (OS).
Installation Procedure for Windows 98 SE OS
This installation procedure will successfully install two USB 1.1 host controllers and a single USB 2.0 enhanced host controller.
1.Ensure that your computer is powered down.
2.Locate an available PCI slot on your computer.
3.Insert the PCI Card into the slot. Apply enough pressure to ensure that it is fully seated.
4.Insert the Belkin USB 2.0 driver installation CD into your computer’s
5.Turn on power and
6.The Windows OS will recognize the PCI Card as a “NEC USB Open Host Controller” and the “Add New Hardware Wizard” dialog box will open. Click “Next”.
7.Select “Search for the best driver for your device” and click “Next”.
8.Uncheck all the boxes and click “Next”.
5
