Belkin F6D301 Installing and Setting Up the Card, Insert Insert the Card into your Computer

Installing and Setting Up the Card

Step 2 Insert

Insert the Card into your Computer

2.1You will be prompted to remove the CD and insert your Card. To do so, remove the CD from the

CD-ROM drive and insert the Card, label side UP, into your computer’s CardBus slot firmly until it stops. Click “OK”

to continue.

2.2The Found New Hardware Wizard will appear. (This may take 15-20 seconds to appear.) Select “Install the software automatically” and click “Next” to install

the hardware.

2.3The installation is now complete. Click “Finish” to exit.

10