Troubleshooting
48
Troubleshooting

Troubleshooting

Problem Description and Solution

The PS does not work. • The battery is drained.
→Charge the battery fully. (See “Battery Charge” on page 7.)
• The PS has been cancelled or the PS has not been
registered.
→Consult your dealer.
• The power is OFF.
→Turn it ON. (See “Power On/Off” on page 8.)
The PS does not ring. • Ringer volume is set to “Off”.
→Adjust the ringer volume level. (See “Ringer Volume
Adjustment” on page 14.)
You cannot make/receive a call. • The PS is out of range or the Cell Station (CS) is busy.
→Move closer to the CS or try again later.
• The radio channel is busy or a radio communication error
occurred.
→Try again later.
You cannot dial. • The number which you dialled is restricted by the
Business Telephone System.
→Consult your dealer.
• The key lock mode is ON.
→To cancel the mode, press the joystick for about 2 seconds.
(See “Key Lock” on page 15.)
• The radio channel is busy or a radio communication error
occurred.
→Try again later.
Noise is frequently heard. →Set the PS and CS away from other electrical appliances.
→Move closer to the CS.
“CS Busy” is displayed. • The Cell Station is busy.
→Try again later.
“PS Not Connected” is
displayed.
• The called PS is out of range or is not turned on.
→Try again later.
The PS stops working during
operation.
→Turn the PS off, then turn it back on. (See “Power On/Off”
on page 8.)
→Reinsert the battery and try again. (See “Battery
Installation” on page 7.)
Two short beeps are heard
during a conversation.
• The radio signal is weak.
→Move closer to the CS.