Belkin P72655 I. Introduction, II. Package Contents, III. Product Detail, Time Out Setting

I.Introduction

Thank you for purchasing the Belkin Components Bitronics DualBus Switch Kit! Now, you and your colleague can share and select between two different parallel devices from your desktop. Plus, if you are using Windows 95 or 98, you will take advantage of Virtual Port Software, which allows you to print automatically!

The Bitronics DualBus Switch gives you and another computer the ability to communicate to two parallel devices at the same time. Also, it allows you to switch so that either user can use either device through the switching software.

II.Package Contents

•	Bitronics DualBus Switch, 2-2	F1U127
•	Power Adapter, 9VDC, 600mA	F1D065-PWR
•	2 x IEEE 1284 compliant cables	F2A047-06

•	User manual	P72655
•	Registration card	P72009

III. Product Detail

Connectors to Devices

Device LEDs

Computer LEDs

Connectors to Computers Manual select buttons

Optional	DIP Switches
Power Jack
9VDC, 500mA,
Center positive

DIP Switch Settings (ON is Down)

SW1 – RESET switch	ON:	Normal Operation
	OFF:	RESET the switch

SW2 and SW3 – Time Out setting.

Time Out is the amount of time the switch remains locked on a computer after data transfer. Use a longer Time Out when connecting to Scanners, Mass Storage Devices, or when printing large print jobs.

	SW2	SW3	Time Out Setting
	ON	ON	5 seconds
	ON	OFF	10 seconds	! Recommended
	OFF	ON	20 seconds
SW4 –	OFF	OFF	40 seconds
	Not used

Page 2