In Windows NT, you can perform the same installation as in the Windows 95 /98 procedure above. Make sure the power supply is connected to the Bitronics switch, otherwise, there may be a significant delay in the processing of requests from
The Printer properties in Windows NT is slightly different. After installing the software and restarting the computer, go the printer properties and select the PORTS tab. To find the correct ports to be used with the Bitronics switch, you must scroll down the list until the “LPx1: PA (autoswitch)” comes up. Put a checkmark on the port that connects to the printer. In this case, it is Port A on the Bitronics switch:
To set the spool settings correctly, click on the SCHEDULING tab. Make sure “Start printing after last page is spooled” is selected. Also, set “Priority” to highest:
Click OK when done.
Page 14
