Operating Your Telephone

Viewing Caller Information During Incoming Calls

Caller ID Screen Icons

When an incoming call is received, the screen will display: A) the name,

B)number, D) date, T) time and C) number of calls if available.

OR

PRIVATE will appear if the name and/or number of the caller are blocked.

OR

UNKOWN will appear if the name and/or number of the incoming call are not available.

OR

NO DATA SENT if data is not sent.

OR

MESSAGE ERROR will appear if the wrong data was received from the phone line.

Once the phone is answered, the dis- play will resort to a call timer.

The NEW call icon will light indicating there is at least one (1) new call to review. In addition, the number of total calls will be displayed and the MODE button will flash indicating a new call.

The REPEAT call icon will light if the C500 receives more than one call from the same number.

The FORWARD icon will light when the C500 receives a call forwarded from another number.

Viewing the Caller List

Press MODE once and use the

( ) UP or DOWN arrows to scroll through entries. Records will be listed in the order they were received. To exit the CID mode, press MODE twice; the phone will return to stand-by mode. END OF LIST will appear when the end of the call list is reached.

Placing a Call from the List

Press MODE once and use the arrow UP or DOWN to locate the desired record. Dialing can be done in two ways:

1.Press ENTER twice, then lift handset as indicated on the screen.

18

Page 18
Image 18
BellSouth C500 owner manual Viewing Caller Information During Incoming Calls