BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS manual Nexiq Bendix Application Card

	LED Diagnostic Trouble Codes
LFT -	Left	ECU -	ABS Controller
RHT -	Right	SEN -	Wheel Speed
DRV -	Drive Axle		Sensor
ADD -	Additional	MOD -	Pressure Modulator
STR -	Steer Axle		Valve
VLT -	Power	TRC -	Traction Control
			LEDs
Example: If the Diagnostic			Green
Trouble Code is "Right			VLT
			Red
Steer Axle Sensor", the
			SEN
RDU™ unit will display one			STR
green and three red LEDs			RHT

FIGURE 12 - DIAGNOSTIC TROUBLE CODES

Bendix® RDU™ Communication Problems

If the ABS ECU does not respond to the RDU™ tool’s request for diagnostic trouble codes, the RDU™ tool will illuminate each red LED in a clockwise pattern. This pattern indicates the loss of communication and will continue until the ABS ECU responds and communication has been established.

Possible sources of communication problems are:

1.A problem with the J1587 link at the in-cab off-board diagnostic connector (9 or 6 Pin).

2.The ECU does not support PID194.

3.No power is being supplied to the ECU and/or the diagnostic connector.

4.The J1587 bus is overloaded with information and the RDU can not arbitrate access.

5.A malfunctioning RDU™ tool.

Nexiq Bendix Application Card

Nexiq provides a Bendix application card for use with the ProLink tool. It can also be used to diagnose the EC-30™, EC-17™, Gen 4™ and Gen 5™, and MC-30™ABS Controllers. For more information on the Bendix application card visit www.bendix.com, Nexiq at www.nexiq.com, or your local authorized Bendix parts outlet.

Heavy Duty
Pro-LinkMulti Protocol	PC Card MPSI
Cartridge	Part Number
	805013

FIGURE 13 - NEXIQ (MPSI) PRO-LINK TOOL

16

FIGURE 14 - BENDIX® ACOM™ DIAGNOSTICS

Bendix® ACom™ Diagnostics 3.0 Software

Bendix® ACom™ Diagnostics is a PC-based software program and is designed to meet RP-1210 industry standards. This software provides the technician with access to all the available ECU diagnostic information and configuration capability, including:

•ECU information

•Diagnostic trouble codes and repair information

•Configuration (ABS, ATC, and more)

•Wheel speed information

•Perform component tests

•Save and print information

When using ACom™ Diagnostics software to diagnose the EC-60 ABS ECU, the computer’s serial or parallel port needs to be connected to the vehicle’s diagnostic connector.

For more information on ACom™ Diagnostics software or RP1210 compliant tools, go to www.bendix.com or visit your local authorized Bendix parts outlet.

See Page 42 for Appendix A: J1587 SID and FMI codes and their Bendix blink code equivalents

www.bendix.com

Visit Bendix online for the latest information, and ways to find the Bendix contacts you need. Contact technical support, service engineers, Bendix account managers, and more — www.bendix.com is your complete Bendix resource.

Bendix Technical Assistance Team

For direct telephone technical support, call the Bendix technical assistance team at:

1-800-AIR-BRAKE(1-800-247-2725),

Monday through Friday, 8:00 A.M. to 6:00 P.M. EST, and follow the instructions in the recorded message.

Or, you may e-mail the Bendix technical assistance team at: tbs.techteam@bendix.com.