BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS manual Pressure Modulator Valves

	Troubleshooting Diagnostic Trouble Codes:
	Pressure Modulator Valves
1st. Blink	Location
Code
7	Left Steer Axle
8	Right Steer Axle
9	Left Drive Axle
10	Right Drive Axle
16	Left Additional Axle
17	Right Additional Axle

2nd.	Diagnostic
Blink	Trouble Code	Repair Information
Code	Description
1	Release	Verify no continuity between PMV leads and ground. Verify 4.9 to 5.5 ohms from
	Solenoid	REL to CMN & HLD to CMN, and 9.8 to 11 ohms from REL to HLD. Check for
	Shorted	corroded/damaged wiring or connectors between ECU and PMV.
	to Ground
2	Release	Verify no continuity between PMV leads and voltage. Verify 4.9 to 5.5 ohms from
	Solenoid	REL to CMN & HLD to CMN, and 9.8 to 11 ohms from REL to HLD. Check for
	Shorted to	corroded/damaged wiring or connectors between ECU and PMV.
	Voltage
3	Release	Verify 4.9 to 5.5 ohms from REL to CMN & HLD to CMN, and 9.8 to 11 ohms from
	Solenoid	REL to HLD. Check for corroded/damaged wiring or connectors between ECU
	Open Circuit	and PMV.
4	Hold	Verify no continuity between PMV leads and ground. Verify 4.9 to 5.5 ohms from
	Solenoid	REL to CMN & HLD to CMN, and 9.8 to 11 ohms from REL to HLD. Check for
	Shorted	corroded/damaged wiring or connectors between ECU and PMV.
	to Ground
5	Hold	Verify no continuity between PMV leads and voltage. Verify 4.9 to 5.5 ohms from
	Solenoid	REL to CMN & HLD CMN, and 9.8 to 11 ohms from REL to HLD. Check for
	Shorted	corroded/damaged wiring or connectors between ECU and PMV.
	to Voltage
6	Hold	Verify 4.9 to 5.5 ohms from REL to CMN & HLD to CMN, and 9.8 to 11 ohms from
	Solenoid	REL to HLD. Check for corroded/damaged wiring or connectors between the
	Open Circuit	ECU and PMV.
7	CMN Open	Verify 4.9 to 5.5 ohms from REL to CMN & HLD to CMN, and 9.8 to 11 ohms from
	Circuit	REL to HLD. Check for corroded/damaged wiring or connectors between the
		ECU and PMV.
8	Configuration	A mis-match exists between the ECU configuration and the modulator installation
	Error	and wiring. Verify PMV wiring and installation. Verify ECU configuration.

20