BenQ DC C40, DC C30 Using the DC C30/C40

BenQ DC 5530 User’s Manual
Using the DC C30/C40 17
Englisch
3.10 Using Macro Mode
Your camera is equipped with a macro function that allows you to focus on very close
subjects. In macro mode you can focus on subjects 50 cm from the lens when in the
maximum wide angle (zoomed out) setting and 10 cm in the maximum telephoto (zoomed
in) setting.
When in Photo mode, press the MACRO button on
the back of the camera to enter Macro mode. The Macro
mode icon appears on the LCD screen when in Macro
mode.
To leave Macro mode, press the MACRO button again.
3.11 Using the Self Timer
Your camera has a self timer that allows you to take pictures of yourself. When the self timer
function is enabled, there is a 10 second delay between the shutter being pressed and the
picture being taken.
1. To enable the self timer function, press the SELF
TIMER button until the self timer symbol appears on
the LCD display.
2. Place the camera in a stable position, preferably on a
tripod.
3. Compose your shot as normal.
4. Press the shutter button.
5. The camera takes a picture 10 seconds after you press
the shutter button. You will hear some beeps,
indicating that the self timer is active.
NOTES:
• Distances referred to measure the distance between the
camera lens and the subject.
• Auto and Red-eye Reduction flash modes cannot be
used in Macro mode.
w
T
Macro
Button
41
A
3M
Macro mode icon
Self Timer icon
41
1/108
F2.7
A
3M