BenQ DC 5530 User’s Manual
Using the DC C30/C40
18
Englisch
3.12 Using the Date Stamp Function
The Date Stamp function can be used to add a date to your pictures as you take them.
1. To enable the Date Stamp, turn the camera on and
make sure it is in Photo or Video mode.
2. Press the MENU button.
3. Use the UP or DOWN buttons to select the Date
Stamp option.
4. Press the LEFT or RIGHT buttons to select On or
Off.
5. Press the SET button to save your setting and leave
the Date Stamp Function submenu.
3.13 Using Long Shutter Speeds
Under certain conditions, you may want to use long shutter speeds either for special effects or
when working in low light conditions. Your camera is equipped with a set of long shutter
speeds.
1. Turn on the camera and make sure it is in Photo
mode.
2. Press the MENU button.
3. Use the UP or DOWN buttons to select the Long
Shutter option.
4. Press the LEFT or RIGHT buttons to select the speed
you require : Off, 1, 2, 4, or 8 seconds.
5. Press the SET button to save your selection and leave
the Long Shutter submenu.
Date Stamp
ON OFF
YMD
123
W
B
Long Shutter
OFF 1" 2" 4"
123
YMD
Long Shutter
8"
123
YMD