BenQ DC C40, DC C30 Preparing Your DC C30/C40 for Use

BenQ DC 5530 User’s Manual
Preparing Your DC C30/C40 for Use 5
Englisch
2.2 Low Battery Indicator
A low battery indicator appears on the LCD screen when the batteries are nearly
exhausted. Batteries should be replaced when the low battery indicator appears.
2.3 Turning the Power On
Press the POWER button. The LED indicator begins flashing green. It takes about 3 seconds
to power on the camera.
Notes
• Do not use manganese batteries. Manganese batteries cannot supply sufficient
power to support camera operation.
• Replace all batteries at the same time. Never mix old and new batteries.
• Remove batteries from the camera if you do not plan on using it for more than
two weeks.
• The camera body may feel warm after extended used. The is normal.
Note
Set the date and time after turning the camera on for the first time. See the next section.
w
T
LED Indicator Power button