BenQ DV3750 user manual Connecting S-Video Signals, Equivalent

English

Connecting S-Video Signals

1.Connect the S-Video output of your AV equipment to the display's S-VIDEO terminal using an S-Video cable. Pay attention to the direction of the connector on the S-Video cable when inserting.

2.Connect the audio output of your AV equipment to the display's S-VIDEO AUDIO L/R input terminals using the AV cable or

equivalent. S-Video cable

An S-video signal provides a higher quality image to that of Composite video. It is recommended to use this input whenever possible. If your AV equipment provides a component video output (YPBPR or YCBCR), this should be used in preference to either composite or S-video signals.

Audio (AV) cable

DVD player

Connecting Component Video Signals

1.Connect the Component video output of your AV equipment to the display's COMPONENT Y CB/PB CR/PR terminals using a Component video cable.

2.Connect the audio output of your AV equipment to the display's COMPONENT AUDIO L/R input terminals using the AV cable or equivalent.

1. Of the currently available video signal types, Component video input offers the best quality. Component video output is available on progressive scan DVD players and Digital television decoders. The image quality with this type of input is superior to that obtained with S-video. All High Definition Television signals must go through this input.

2.DV3750 supports 480P, 720P, 576P and 1080i HDTV signals provided by high definition AV equipment such as a HDTV decoder.

3.Ensure the connector colors match, failure to connect the colors of the cables to the corresponding colored terminals will result in a incorrectly colour image or badly distorted image.

Component Video

Cable

Audio (AV) cable

DVD player

8 Setting up Your Display