Chapter 3 Configuration
This chapter describes the web-based ESG-103 configuration in detail. The ESG-103 broadband sharing router has a structured menu and a "Quick Installation Wizard" page to help user quickly set up their ESG-103. This chapter explains each of these menu sections. When the ESG-103 boots up at the first time, it has a default IP address “192.168.1.1” assigned to its LAN interface. In order to configure ESG-103, please point an Internet browser from the browsing host to http://192.168.1.1 and you will be pre- sented with the log in screen as shown below. You must log in with the cor- rect user name and password to start the ESG-103 configuration in a MD5 authenticated web session. For setting up this MD5 authenticated session, the default user name is “admin”, and the default password is also “admin”. We strongly recommend that - you should change the root pass- word as described in the Admin Password section.
Once your log-in is successful, you will be presented with a welcome web page. In that page, you can proceed with ESG-103 configuration or link to BenQ's web site for advanced information.
Chapter 3 Configuration - 8
