BenQ FP567 user manual C. Refresh Rate Selection

BenQ LCD Color Monitor User's Guide

C. Refresh Rate Selection

There is no need to choose the highest possible refresh rate on a LC display. It is not technically possible for an LC display to flicker. Even at a refresh rate of 60 Hz you will get an absolutely flicker- free image. More important is that you make sure that you use one of the factory modes. In con- trast to a modern CRT monitor, which is a multiscan monitor, the LC display is a multi-frequency monitor. This means, the best results are only obtained by using the factory modes. You will find a table with the factory modes in this user's guide. For the native resolution of 1024x768, these, for example, are 60, 70 and 75 Hertz, not 72 Hz; however, in Windows 95/ 98/ 2000 you can change the refresh rate as follows:

1.Double click the “Display” icon in the control panel.

2.From the “Display Properties” window, select the “Settings” tab. Click the “Advanced properties” button in the bottom right corner.

English 30