Using the recorder function | BenQ Joybee 200 specs

equalizer functions are also available when you play back a recorded program. Refer to "Repeat play" on page 23, "Selecting an EQ mode" on page 24, and "Selecting a playback speed" on page 24 for more details.

Using the recorder function

The Joybee 200 has a recording function to enable you to record your voice using the built-in microphone or an external audio signal as follows.

•Recording function will be disabled when the battery is low.

1.Press the key to start recording and speak into the microphone.

2.Press the key to pause recording and press it again to resume recording.

3.Press and hold the key for 2 seconds to stop record- ing.

Refer to "Setting the recording options" on page 30 for more details about setting the recording parameters.

All recorded programs are saved as MP3 files with filenames such as MIC0101 or LINE0101. The prefix indicates the source of the recording and the number at the end of the filenames refers to date and the order in which the programs were recorded. These files are saved in the MICIN or LINEIN folders on the Joybee 200. Use the procedure described in "Playing back recorded audio files" on page 28 to listen to your recorded programs. The repeat play, multiple playback speeds, and equalizer functions are also available when you play back a recorded program. Refer to "Repeat play" on page 23, "Selecting an EQ mode" on page 24, and "Selecting a playback speed" on page 24 for more details.

27

Image 33

BenQ Joybee 200 user manual Using the recorder function

Contents

Welcome Copyright Page Memo Table of Contents Adding music from an audio CD to Joybee Introduction Introducing the BenQ Joybee 200 MP3 Player System requirements Package contents Touring the BenQ Joybee 200 MP3 Player Putting leather strap on Options for the current mode Mode Press to switch modesPress to cancel current setting and go Back to the previous level in setup or Press to confirm a selection in setup Playing or recording and switch to fileGoes off Press again to continue playing Using after force shutdown Previous/Fast RewindUSB port Force shutdown Indicates repeat mode for all files Indicates A-B repeat modeIndicates MP3/WMA mode LCD display Indicates audio recording mode Indicates voice recording modeIndicates FM mode Indicates setup mode Connect the adapter to a wall outlet Charging the batteryPage Connecting earphones and wired remote control Connecting the Joybee 200 to a PC Disconnecting the Joybee 200 from a PC Page Installing the software Before connecting the Joybee 200 to your PC Install BenQInstalled QMusic requires Direct X to be installed on your Installing the USB driver Installing in Windows ME/Windows 2000/Windows XPInstalling in Windows 98SE Follow these steps to turn the Joybee 200 on or off Turning the Joybee 200 on and off Transferring data to the Joybee Transferring data with Windows ExplorerTransferring files with QMusic Current track Playing MP3/WMA music filesUse Keys to skip To the previous or next tracks Repeat play Selecting an EQ mode Selecting a playback speedPress the key to confirm your selection Use the or keys to scan to the previous or next frequency Listening to FM radio Recording FM radio Saving preset channels in memoryUse the or keys to choose a channel number Resume recording Using the recorder function Playing back recorded audio files Deleting files from the Joybee System setupOr Voice File options, a list Deletion. Use Setting the recording options Key to confirm your choice Press the key to confirm your choicePress the key to con- firm your choice VOR Setting up a timer recording Setting the power save option Using the lyric sync function Using the play list function Key to confirm your setting Setting the date and time Press the key to con- firm your selection Setting the language Formatting the Joybee Upgrading the firmware Viewing system information Press the Mode key to exit the setup menu Using QMusic Overview of QMusic Left button Convert CD audio tracks to Provides specific QMusic functionsMP3 formats Under JoybeePage Feature Sets repeat or random playing of files Buttons CD, and volume controlPlayback Buttons File, skipping to the next or previous files Adding music to the Joybee 200 using QMusic Put an audio CD in the CD-ROM on your PC. Adding music from an audio CD to JoybeePage Page Page Adding files from a PC to Joybee Page Page Updating Joybee 200 automatically with QMusic Page Option dialog box shown, click the Joybee tab Button to Deleting files using QMusicPage Page Check the following Troubleshooting Service Information USA