To cancel the timer, perform the following steps.
•Using the remote control
Press Timer On and press 
/ 
to highlight Off and press Mode/Enter.
•Using the OSD menu
1.Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press Mode/Enter. A confirmation message is displayed.
2.Highlight Yes and press Mode/Enter to confirm. You will see the message “Timer is Off!” appearing on the screen.
How to use the Timer On key?
Timer On is a
• If the presentation timer is off, pressing this key displays a confirmation message. You can decide whether to activate the timer or not by following the
• If the timer is already on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the
Hiding the image
In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. The word "BLANK" appears in the corner of the screen while the image is hidden. When this function is activated with an audio input connected, the audio can still be heard.
You can set the blank time in the SYSTEM SETUP: Basic
>Blank Timer menu to let the projector return the image automatically after a period of time when there is no
action taken on the blank screen. The length of time can be set from 5 to 30 minutes in
If the preset time spans are not suitable for your personation, select Disable.
No matter Blank Timer is activated or not, you can press any key (except the Page Up/ Down key) on the projector or remote control to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to become heated.
38 Operation
