BenQ MP526 Description of each menu, surface is not white. See Using Wall Color on page 33 for

Description of each menu

1. DISPLAY menu

2. PICTURE menu

Function	Description
Wall Color	Corrects the projected picture's color when the projection
	surface is not white. See "Using Wall Color" on page 33 for
	details.
Aspect Ratio	There are four options to set the image's aspect ratio
	depending on your input signal source. See "Selecting the
	aspect ratio" on page 31 for details.
Keystone	Corrects any keystoning of the image. See "Correcting
	keystone" on page 25 for details.
	Displays the position adjustment page. To move the projected
	image, use the directional arrow keys. The values shown on the
Position	lower position of the page change with every key press you
	made until they reach their maximum or minimum.
	This function is only available when a PC signal (analog
	RGB) is selected.
	Adjusts the clock phase to reduce image
	distortion.
Phase
	This function is only available when a
	PC signal (analog RGB) is selected.
H. Size	Adjusts the horizontal width of the image.
	This function is only available when a PC signal (analog
	RGB) is selected.
Digital Zoom	Magnifies or reduces the projected image. See "Magnifying and
	searching for details" on page 31 for details.
Picture Mode	Pre-defined picture modes are provided so you can optimize
	your projector image set-up to suit your program type. See
	"Selecting a picture mode" on page 33 for details.
	Selects a picture mode that best suits your need for the image
Reference Mode	quality and further fine-tune the image based on the selections
	listed on the same page below. See "Setting the User 1/User 2
	mode" on page 34 for details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness"
	on page 34 for details.
Contrast	Adjusts the degree of difference between dark and light in the
	image. See "Adjusting Contrast" on page 34 for details.

Operation 49