10. Tighten the screw that secures the lamp.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
11. Ensure the handle is fully laid flat and locked in place.
12. Replace the lamp cover on the projector.
13. Tighten the screws that secure the lamp cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
14. Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15.After the 
/
to highlight the SYSTEM SETUP: Advanced menu.
16.Press
to highlight Lamp Settings and press Mode/Enter. The Lamp Settings page is displayed.
17. Press to highlight Reset Lamp Timer and | Notice |
| |
press Mode/Enter. A warning message is | Reset Lamp Timer? | ||
displayed asking if you want to reset the lamp | |||
|
| ||
timer. Highlight Reset and press Mode/Enter. | Reset | Cancel | |
The lamp time will be reset to "0". |
|
| |
Do not reset if the lamp is not new or replaced as this could cause damage.
59
