BenQ MX880UST user manual Lift the handle so that it stands up. Use the

7.Lift the handle so that it stands up. Use the

handle to slowly pull the lamp out of the projector.

• Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector.

• Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.

• Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images.

8.As shown in the figure, lower the new lamp.

9.Reconnect the lamp connector.

10. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection, which	2
could result in malfunction.

• Do not over tighten the screw.

11.Ensure the handle is fully laid flat and locked in place.

12.	Replace the lamp protection film that comes
	with the new lamp on the lamp compartment.	2
13.	Replace the lamp cover on the projector.
		1

64 Maintenance