Shutdown
1.Press Power and a confirmation prompt message displays. To turn the projector off, press Power again.
2.The Power indicator light flashes orange and the lamp shuts down. The fans will continue to run for approximately 90 seconds to cool down the projector lamp.
To protect the lamp, the projector will not respond to any commands during the cooling process.
3.Turn the main power switch off.
Note:
•Do not unplug the power cord before the projector shutdown sequence is complete or during the
•If the projector is not properly shut down, to protect the lamp, when you attempt to re- start the projector within minutes, the fans will run for a few minutes to cool down. Press Power again to start the projector after the fans stop.
Operation 27
