![Step 9. Reset the lamp counter](/images/new-backgrounds/120898/12089887x1.webp)
•Do not reset if the lamp is not replaced as this could cause damage.
Step 9. Reset the lamp counter
1.Press and hold Exit on the projector for 3 seconds to display the total used lamp time.
2.Press Menu on the projector or on the remote control to access the lamp hour timer. An adjustment message will appear.
3.Press W or X to reset lamp hours and press EXIT to leave.
Temperature warning light
When the Temperature warning light is on, it is warning you of the following possible problems:
1.The internal temperature is too high.
2.Dust filters are clogged.
3.The fans are not working.
Turn the projector off, check that the dust filters are clean. If the problem persists, contact qualified service personnel for further help.
For more detailed information, please refer to the following section.
Indicators
Illustration - table legend.
1.Blank
2. : Light flashing
3. : Light ON
4.O : Orange light
5.R : Red light
6.G : Green light
40 Maintenance