English
Connections
When connecting a signal source to the projector, be sure to:
1.Turn all equipment off before making any connections.
2.Use the correct signal cables for each source.
3.Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores.
Connecting a computer or monitor
Connecting a computer
The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and Macintosh® computers. A Mac adapter (an optional accessory) is needed if you are connecting legacy version Macintosh computers.
Additionally, you can also connect the projector to a computer via the USB cable so you can perform paging operations of the application on the PC or notebook.
To connect the projector to a notebook or desktop computer:
• With a VGA cable: |
| • With a HDMI cable: |
| ||
|
| Your computer must be |
|
| equipped with a HDMI output |
|
| socket. |
1. Take a VGA cable and connect one |
| 1. Take a HDMI cable and connect one |
end to the |
| end to the HDMI jack of the |
computer. Connect the other end of |
| computer. Connect the other end of |
the VGA cable to the |
| the cable to the HDMI signal input |
COMPUTER signal input jack on |
| jack on the projector. |
the projector. |
|
|
2. If you wish to use the remote paging function, take a USB cable and connect the larger end to the USB port of the computer, and the small end to the (USB) socket on the projector. See “Remote paging operations” on page 39 for details.
3. If you wish to make use of the projector (mixed mono) speakers in your presentations, take a suitable audio cable and connect one end of the cable to the audio output jack of
the computer, and the other end to the AUDIO jack of the projector. Once connected, the audio can be controlled by the projector
The final connection path should be like that shown in the following diagram:
|
|
|
|
| Many notebooks do not |
|
|
|
|
| turn on their external |
|
|
|
|
| video ports when |
|
|
|
|
| connected to a |
|
|
|
|
| projector. Usually a key |
|
|
|
|
| combo like FN + F3 or |
|
|
|
|
| CRT/LCD key turns the |
|
|
|
|
| external display on/off. |
|
|
|
| 1. USB cable | Locate a function key |
|
|
|
| labeled CRT/LCD or a | |
1 | 2 | 3 | 4 | 2. Audio cable | function key with a |
3. VGA cable | monitor symbol on the | ||||
|
|
|
| 4. HDMI cable | |
|
|
|
| notebook. Press FN | |
|
|
|
|
| and the labeled |
|
|
|
|
| function key |
|
|
|
|
| simultaneously. Refer |
|
|
|
|
| to your notebook's |
|
|
|
|
| documentation to find |
|
|
|
|
| your notebook's key |
|
|
|
|
| combination. |
18 Connections
