BenQ SP840 user manual Description of each menu, English

English

Description of each menu

	FUNCTION	DESCRIPTION
	Picture Mode	Pre-defined picture modes are provided so you can optimize your
		projector image set-up to suit your program type. See "Selecting a
		picture mode" on page 34 for details.
	Reference	Selects a picture mode that most suits your need for the image quality
		and further fine-tune the image based on the selections listed on the
	Mode	same page below. See "Setting the User 1/User 2/User 3 mode" on
		page 34 for details.
	Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on
		page 35 for details.
1.	Contrast	Adjusts the degree of difference between dark and light in the image.
PICTURE:		See "Adjusting Contrast" on page 35 for details.
		system is selected.
		Adjusts the color saturation level -- the amount of each color in a
	Color	video image. See "Adjusting Color" on page 35 for details.
		This function is only available when Video or S-Video with NTSC
Basic
	Tint
		Adjusts the red and green color tones of the image. See "Adjusting
		Tint" on page 35 for details.
menu		This function is only available when Video or S-Video with NTSC
		system is selected.
		Adjusts the image to make it look sharper or softer. See "Adjusting
	Sharpness	Sharpness" on page 35 for details.
		This function is only available when Video or S-Video with NTSC
		system is selected.
	Flesh Tone	See "Adjusting Flesh Tone" on page 35 for details.
	Save Settings	Saves the settings made for User 1 or User 2 or User 3 mode.
	Reset Picture	Resets the picture settings for User 1 or User 2 or User 3 mode.
	Settings

50 Operation