Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product.
Safety Instructions
1. Please read this manual before you 4. | In some countries, the line voltage is |
operate your projector. Save it for | NOT stable. This projector is |
future reference. | designed to operate safely within a |
| mains voltage between 100 to 240 |
| volts AC, but could fail if power cuts |
| or surges of ±10 volts occur. In areas |
| where the mains voltage may |
| fluctuate or cut out, it is |
| recommended that you connect |
| your projector through a power |
2. Do not look straight at the projector | stabilizer, surge protector or |
uninterruptible power supply | |
lens during operation. The intense | (UPS). |
light beam may damage your eyes. |
|
| 5. | Do not block the projection lens with |
|
| any objects when the projector is |
|
| under operation as this could cause |
3. | Refer servicing to qualified service | the objects to become heated and |
| personnel. | deformed or even cause a fire. To |
|
| temporarily turn off the lamp, press |
|
| BLANK on the projector or remote |
|
| control. |
English
Important safety instructions | 3 |
