Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.
Your projector is designed to be installed in one of four possible installation locations:
1.Front Table
Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.
2.Front Ceiling
Select this location with the projector suspended
Purchase the BenQ projector ceiling mount kit from your dealer to mount your projector on the ceiling.
*Set Front Ceiling after you turn the projector on.
3.Rear Table
Select this location with the projector placed near the floor behind the screen.
Note that a special rear projection screen is required. *Set Rear Table after you turn the projector on.
4.Rear Ceiling
Select this location with the projector suspended
Note that a special rear projection screen and the BenQ projector ceiling mount kit are required for this installation location.
*Set Rear Ceiling after you turn the projector on.
*To set the projector position:
1.Press MENU/EXIT on the projector or remote control and then press 
/ 
until the SYSTEM SETUP: Basic menu is highlighted.
2.Press 
/
to highlight Projector Position and press 
/ 
until the correct position is selected.
SYSTEM SETUP: Basic
Presentation Timer |
|
Language | English |
Projector Position | Front Table |
Auto Power Off | Disable |
Blank Timer | Disable |
Panel Key Lock | Off |
Timer Controller | Disable |
Splash Screen | BenQ |
My Screen |
|
Analog RGB | MENU Exit |
12 Positioning your projector
