Safety Instructions
1.Read this user’s guide before you operate your projector and save it for future reference.
2.When the lamp becomes extremely hot during operation, allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond rated life could cause them to explode in rare occasions.
3.Power is still available when the projector is in the standby mode. Never replace lamp assembly or any electronic components unless the projector is unplugged.
4.Do not attempt to service this product yourself, as opening or removing covers may damage the components inside and will void your warranty.
5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6.The standard remote control contains a
7.This product is capable of displaying inverted images for ceiling mount configurations. Please use suitable equipment for mounting the unit and make sure it is securely installed.
8.Openings in front or at two sides are for ventilation. They must not be blocked or covered.
9.For ventilation reasons, fans continue to operate for about 1 minute after the projector is powered off. Please do not unplug the power cord until the fans stop.
10.Do not look straight at the projector lens during operation. The intense light beam may injure your eyes.
Safety Instructions iii
