B Image Page
Select the Image
If the input is from video,
Figure 21. Image | Figure 22. Image |
Only available when the input signal is PC. | Only available when the input signal is from |
| |
| video, |
Setting effects
Auto Resize
H.Phase
H. Size
H.Position
V. Position
When Auto Resize is on, the projector determines the best fit of the image to the screen.
If flickers occur on the projected image, users may try to adjust the H. Phase manually.
If the projected image is too wide or too narrow for the screen, users may turn Auto Image off and adjust the H. Size manually to fit the screen size.
(move the image left) |
|
| (move the image right) |
|
| ||
|
|
|
|
The Auto Image should be turned off to activate the H. Position item. Position adjustments are saved when the projector is power off.
(move the image down) |
|
| (move the image up) |
|
| ||
|
|
|
|
Position adjustments are saved when the projector is power off.
Image Ratio | 4:3 (Normal) | 16:9 (Wide) |
System |
| |
When a video or | ||
| system. Users can select desired video systems. When selecting system, the projector will | |
| auto detect the selected system simultaneously, and the OSD will still exit on the screen. The | |
| default setting of System is “Auto” (See Figure 22). | |
|
|
|
Color
(Less)
Tint
(Red)
(More)
|
|
| (Green) | Source is Video or |
|
|
| ||
|
|
| ||
|
|
|
|
|
*Tint may not be adjusted with PAL/SECAM video signal input.
Operation 15