Other Correspondent and Remote Functions Messages
OSD | FUNCTION |
|
|
| The selected source will be displayed at the bottom right of the |
| screen for 3 seconds after selecting the source. |
Source |
|
|
|
| The image will be frozen when the Freeze is pressed. A mark |
| appears at the lower right of the screen for 3 seconds during the |
| freeze function. Furthermore, a “ ” mark appears at the lower |
Freeze | right of the screen for 3 seconds when freeze is released. Freeze |
is released when the source button or Freeze button is pressed | |
| again. |
|
|
| Press Mute and the sound will be muted. There will be an OSD |
| message as shown left: |
Mute | Press Mute again or the volume +/- buttons to turn off the mute. |
| |
|
|
| Press volume + or – to adjust the volume. The OSD message on |
| the left will appear: (The message will disappear automatically 3 |
| seconds after the volume is adjusted.) |
Volume |
|
|
|
| By pressing the magnify + , the center of the picture will be |
| magnified. Press the button again, and the image will be further |
| magnified (to a maximum of 4X). Press the magnify - button, and |
| the size of the magnified image will be reduced by 50 percent. To |
Magnify | return to the normal display mode, press Return. |
| |
|
|
Laser | Press this button to generate the laser beam. |
|
|
Disk Pad | If users connect the PS2 (ADB) mouse cable on the projector with |
| the PC/Notebook (Macintosh/ Powerbook) mouse port, the disk |
| pad will be able to function as a PC/Notebook (Macintosh/ |
| Powerbook) mouse. When an image has been magnified, press the |
| Disk Pad button to move around the display area (the mouse |
| function is not available when magnify function is on). |
|
|
Drag | This button is a toggle to turn on/off the drag function of the |
| remote mouse. |
|
|
Blank | Press Blank to activate or release the blank function. |
|
|
Operation 17
