Berkel FMS40 manual Electrical Connections Cord Connected Mixers, Single-PhaseMixer

ELECTRICAL CONNECTIONS

ELECTRICAL CONNECTIONS (CORD CONNECTED MIXERS)

Single-Phase Mixer

The electrical cord on this machine is equipped with a three-pronged grounding plug which must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding type, contact an electrician. Do not remove the grounding prong from the plug.

ELECTRICAL CONNECTIONS (NON-CORD CONNECTED MIXERS)

Electrical and grounding connections must comply with the applicable portion of the National Electrical Code and/or other Local Electrical Codes.

Disconnect the electrical power to the machine and follow lockout / tagout procedures.

Three-Phase Mixer

A hole for the 3/4 "-trade-size conduit is located in the rear of the pedestal. Make electrical connections per the wiring diagram located on the inside of the top cover.

•Remove side cover.

•Connect field supply lead wires L1, L2, and L3 to supply harness wires labeled "SERVL1", "SERVL2", and "SERVL3" respectively.

•Connect ground wire to supply harness green wire.

•Reinstall side cover.

FMS30 & FMS40 Owner/Operator Manual – 4 –