Berkel PM60, PM80 T+(%$6,&6, I

T+(%$6,&6

The models PM60 and PM80 planetary mixers are designed for mixing doughs, cremes, potatoes,

mixes, sauces and toppings. They have bowl guards, no-volt release, 99-minute timers and 3 or 6

fixed speeds. They come equipped with a #12 taper hub for accepting any #12 attachment. The

optional VSPH can be used for slicing shredding and grating, while the FCMC can be used for

chopping and grinding.

I167$//$7,21

1. Berkel suggests having an Authorized Berkel Service Technician install your mixer. A list of

Designated Berkel Service Locations (DBSL) can be found at www.berkel.com. This technician

will demonstrate the operation of the mixer.

2. Remove the wooden crating from around the mixer. Loosen and remove the 4 lag bolts (15/16”

or 24mm) holding the mixer to the shipping skid.

3. Install the mixer in a well-lighted area with adequate, unobstructed space so the operator can

move about freely. This location must also be solid and level.

4. Never by-pass the mixer’s electrical switches or circuits. Never activate the mixer using a wall

switch. A licensed electrician, according to local codes, should wire 220-volt mixers.

To prevent the possibility of electrical shock, the mixer must be grounded.

5. Before attaching any accessories/attachments to the mixer, refer to the operating instructions on

page 6 and turn on the mixer in low speed. Check that the rotation of the planetary matches the

sticker on the front of the mixer. If the rotation does not match the sticker, then turn off immedi-

ately and contact a qualified electrician to check the wiring. The direction must match the label.

Make sure the mixer is running smoothly with no obstruction.

PM60 & PM80

OWNER/OPERATOR MANUAL •