Bertazzoni F30PROXV manual Self-Cleaningcycle

SELF-CLEANING CYCLE

	The self-cleaning mode of your new range features a pyrolytic self-cleaning cycle.
	When set to the CLEAN mode, the oven reaches a high temperature that burns off
	all food residues from the inside of the oven.
	It is common to see smoke and/or flames during the clean cycle, depending on the
	content and amount of greasy residues in the oven. If the flame persists, turn off
	the oven and allow it to cool before opening the door and wipe off the excessive
	residues.
	At the end of the CLEAN cycle, some grey ash or burned residue may remain
	inside the oven. This is a mineral deposit that does not burn or melt. The amount of
	ash depends on how heavily soiled the oven was before it was cleaned. It is easily
	removed, when the oven is cold, using a damp paper towel, sponge, or cloth.
	Wipe off any smoke residue that remains on the front frame with a cleaning product
	suitable for oven cavity cleaning. If stains remain, use a mild liquid cleaner. The
	amount of smoke stain is directly related to the amount of food residues in the oven
	cavity before the start of the self-cleaning cycle.
DESCRIPTION	In the self-cleaning cycle, the oven cavity is heated to very high temperatures to
	burn off any residue on the oven interior. After the cleaning cycle, any burnt off
	residue is transformed to ash and can be easily wiped out with a damp sponge.
	Spilled fruit juices may permanently discolour surfaces. This discoloration is
	permanent but will not affect the efficiency of the enamel.
	If the oven is not cleaned regularly, debris may become extremely difficult to remove
	even with the CLEAN function.
PREPARE	Before starting the CLEAN function:
	‐	Remove large pieces of debris and grease deposits from the interior of the oven
		cavity. Debris and grease can ignite at high temperatures.
	‐	Remove all accessories from the oven. The high temperature reached during the
		cycle will damage the accessories.
DOOR LOCK	When the CLEAN cycle starts, the automatic door lock cycle begins. Check the door
	to	confirm that it is locked. You can stop the self-cleaning cycle by turning the

function selector to the OFF position. The CLEANING light will turn off only after the oven has cooled below 500°F and the automatic door lock has completed its cycle to the open position.

NOTE: MAKE SURE THAT THE OVEN DOOR IS LOCKED AT THE BEGINNING OF THE SELF-CLEANING CYCLE.

START

1.Check that the oven cavity is completely empty and the oven door correctly closed.

2.Select CLEAN fu on oven function selector.

3.Set temperature selector to CLEAN.

After these 3 steps the cooling fans will activate, the oven door will lock automatically after 60 seconds and both the pre-heating and clean light indicators will turn on.

As soon as clean light turns on check to ensure that the oven door is correctly locked.

The self-cleaning cycle lasts approximately 2-2 ¼ hours; 30-40 minutes for pre- heating the oven (pre-heating and clean light both on), 60 minutes for actual cleaning (heating and clean light both on), 30-35 minutes for cool-down (only clean light on).

22