Bertazzoni F30PROXV manual Oven Cooking, Using The Lcd Display, Setting Time, Timer

	OVEN COOKING
WARNING	Use Care When Opening Door. Let hot air or steam escape before removing
	or replacing food.
	Do Not Heat Unopened Food Containers. Build-up of pressure may cause
	container to burst and result in injury.
	Keep Oven Vent Ducts unobstructed.
	Placement of Oven Racks. Always place oven racks in desired location while
	oven is cool. If rack must be moved while oven is hot, do not let potholder
	contact hot heating element in oven.
	Do Not Clean Door Gasket. The door gasket is essential for a good seal.
	Care should be taken not to rub, damage, or move the gasket
	Do Not Use Oven Cleaners. No commercial oven cleaner or oven liner
	protectivecoating of any kind should be used in or around any part of the
	oven.
	Clean Only Parts Listed in manual.
	Before Self-Cleaning the Oven. Remove broiler pan and other utensils.
CAUTION	Do not store items of interest to children in cabinets above a range or on the back
	guard of a range – children climbing on the range to reach items could be seriously
	injured.
	DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACE OF OVEN
	Heating elements may be hot even though are dark in colour. Interior surfaces of
	an oven become hot enough to cause burns. During and after use, do not touch, or
	let clothing or other flammable materials come into contact with the heating
	elements or interior surfaces of oven until they have had sufficient time to cool.
	Other surfaces of the appliance may become hot enough to cause burns, for
	example, oven vent openings and surfaces near these openings, oven doors, oven
	glass window.

	USING THE LCD DISPLAY
	At power on, the contact is opened. The display and AUTO symbol flashes and
	time of day starts from 0:00. Power on state with flashing daytime remains until
	time of day is set
SETTING TIME	Press PLUS (+) and MINUS(-) button simultaneously. At Power On, also MODE
	button is possible. Time of day can be set with PLUS or MINUS, while the colon
	between hours and minutes is flashing. When PLUS or MINUS is continually hold,
	the quick setting mode starts. If daytime setting mode is selected while an
	automatic program is active, the automatic program is cancelled.
TIMER	The purpose of the timer is just of a sound signal, which can be set for a max time of
	23h59min. once elapsed the set time, the Bell symbol turns off and a sound signal is
	heard; this sound set off automatically in 7min, or you can stop it by pressing any key
	of the programmer. To set the timer press the M key for 2 seconds, or anyway just to
	see the Bell symbol blinking. Set the timer by using the + or - keys. Release the + or
	- key when you have matched your desired time. In a few seconds the current time
	appears on the display together with the symbol. The countdown starts immediately
	from now on.

SEMI-AUTOMATIC COOKING

Cooking time: Once having selected a coking function and set the desired temperature, press the M key for a 2 seconds time to access the programming mode. The BELL symbol appears. Release and press again the M key. On the display, the A symbol starts blinking and the " dur " writing appears on the display, then it changes to O' 00. Set the cooking time with the - or + keys. (max available time: 10h). The selected time is automatically processed by the programmer in a few seconds, or you can also touch the M key many times just to see again the current time.

The AUTO and POT symbols will be on the display. Once the set cooking time is finished, a sound will be heard and the oven automatically switches off. Please see

16