INSTALLING THE BACKGUARD
The back guard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment.
The supplied back guard is a 2‐part assembly. The box also contains a set of metal screws for securing the back guard to the worktop.
Disassemble the back guard and position the front part on the worktop. Align the screw holes with the corresponding holes at the back of the worktop.
If the holes are not aligned, partially loosen the brackets at the back of the worktop as shown below.
Install the front part of the back guard by tightening the 2 central screws from the top and
2 lateral screws from the bottom.
10
