OPERATING INSTRUCTIONS DT 100 SERIES DT 100 / DT 102 • DT 108 / DT 109

Thank you for selecting the DT 100/102 dynamic studio headphone or the DT 108/109 dynamic headset. Please take some time to read carefully through this operating instructions before setting up the equipment.

Design Features

DT 100 / DT 102

The DT 100/102 are fully enclosed dynamic studio headphones with excellent ambient noise attenuation. They are ideal for use in broadcasting, film and recording studios.

The DT 100 is a double-sided headphone while the DT 102 is the single-side version.

The headband and earphone cushioning has been carefully designed for maximum comfort during long periods of listening. The connecting cables to the ear monitors run safely in the headband and the main connecting cable is terminated on one side with a multi-pin connector.

DT 108 / DT 109

The DT 108/109 are the same as the DT 100/102 head- phones, with the addition of a dynamic hypercardioid microphone. The DT 108/109 headset is used for intercom and talkback systems as well as other applications where a dynamic microphone headset is required.

The DT 109 is a double-sided headset while the DT 108 is the single-side version.

Connection

The DT 100/102 studio headphones and the DT 108/109 headsets are packed with connecting cable, depending upon your specification. For further connecting cables, please refer to “Optional Accessories”.

The K 100.00 connecting cable is built using a tinsel-conductor cord. This type of conductor resists repetitive bending without breaking, yet special care must be taken when making solder joints to connectors. Wherever possible it is recommended to fit crimped brass sleeves to the conductors and then solder the sleeve to the connector. If direct solder connections have to be

11