Beyonwiz DP-S1 manual Quick Setup, Manual Configuration

Quick Setup

2) Manual Configuration

If you select the “Disable” option in the “DHCP”, you have to input the IP address manually.

zIP Address: You can input the address with the NUMERIC buttons and the LEFT/RIGHT buttons. You can move to the next item of Subnet Mask with the DOWN button.

zYou can configure the following items in the same way; Subnet Mask, Gateway, Primary DNS Server IP and Secondary DNS Server IP.

You can apply the changes by pressing the RED button. A pop-up window displays the effective configuration of the Ethernet interface when you press the RED button.

zMAC Address: This will display the MAC address of the Ethernet interface but you can not change it.

NOTE

zYou have to press the RED button to make your changes and configurations for the network interface to take effect.

zIf you set the DHCP function to enable, the rest of the settings can not be changed. However they still have the previous configuration to help you set these easily set the DHCP function is enabled next time.

zThe effective configuration of the Ethernet is always displayed as a pop-up window by pressing the GREEN button.

zTo use the DHCP function for the DP-S1, your router should support the DHCP function. Please check the manual and the configuration of your router.

31