LAN share one common network number.

Where you obtain your network number depends on your particular situation. If the ISP or your network administrator assigns you a block of registered IP addresses, follow their instructions in selecting the IP addresses and the subnet mask.

If the ISP did not explicitly give you an IP network number, then most likely you have a single user account and the ISP will assign you a dynamic IP address when the connection is established. If this is the case, it is recommended that you select a network number from 192.168.0.0 to 192.168.255.0 and you must enable the Network Address Translation (NAT) feature of the BIPAC-5100S. The Internet Assigned Number Authority (IANA) reserved this block of addresses specifically for private use; please do not use any other number unless you are told otherwise. Let's say you select 192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In other words, the first three numbers specify the network number while the last number identifies an individual computer on that network.

Once you have decided on the network number, pick an IP address that is easy to remember, for instance, 192.168.1.254, for your BIPAC-5100S, but make sure that no other device on your network is using that IP address.

The subnet mask specifies the network number portion of an IP address. Your BIPAC-5100S will compute the subnet mask automatically based on the IP address that you entered. You don't need to change the subnet mask computed by the BIPAC-5100S unless you are instructed to do otherwise.

3.7 IP Address Assignment

A static IP is a fixed IP that your ISP gives you. A dynamic IP is not fixed; the ISP assigns you a different one each time. The Single User Account feature can be enabled or disabled if you have either a dynamic or static IP. However the encapsulation method assigned influences your choices for IP address and ENET ENCAP Gateway.

3.7.1 IP Assignment with PPPoA or PPPoE Encapsulation

If you have a dynamic IP, then the IP Address and ENET ENCAP Gateway fields are not applicable (N/A). If you have a static IP, then you only need to fill in the IP Address field and not the ENET ENCAP Gateway field.

3.7.2 IP Assignment with RFC 1483 Encapsulation

In this case the IP Address Assignment must be static with the same requirements for the IP Address and ENET ENCAP Gateway fields as stated above.

3.7.3 IP Assignment with ENET ENCAP Encapsulation

In this case you can have either a static or dynamic IP. For a static IP you must fill in all the IP Address and ENET ENCAP Gateway fields as supplied by your ISP. However for a dynamic IP,

15

Page 14 Page 16
Page 15
Image 15
Billion Electric Company BIPAC-5100S user manual IP Address Assignment, IP Assignment with PPPoA or PPPoE Encapsulation
Page 14 Page 16

BIPAC-5100S specifications

Billion Electric Company, a global leader in broadband and energy management solutions, has developed the BIPAC-5100S, a powerful and versatile router that meets the demands of small to medium enterprises as well as home users. This device combines high-performance networking capabilities with advanced features designed to enhance connectivity and productivity.

One of the standout characteristics of the BIPAC-5100S is its support for a variety of connectivity options, including IPv4 and IPv6 support, which ensures compatibility with current and future networking standards. The router is equipped with a built-in DSL modem, allowing users to connect directly to DSL services while also supporting Ethernet WAN connectivity for flexible Internet service options. This dual capability makes it an ideal choice for users looking for adaptability in their networking solutions.

Performance-wise, the BIPAC-5100S is powered by a high-speed processor and features multiple Ethernet ports to facilitate wired connections for devices like computers, printers, and servers. With support for speeds up to 300 Mbps, this router is designed to deliver seamless streaming, online gaming, and fast downloads. The advanced Quality of Service (QoS) feature allows users to prioritize bandwidth for specific applications, ensuring that critical services receive the necessary resources for uninterrupted operation.

Security is paramount in any networking device, and Billion Electric enhances this aspect in the BIPAC-5100S. The router includes various security protocols such as WPA/WPA2 encryption, firewall protection, and VPN passthrough capabilities. These features protect the network from unwanted intrusions and provide a safe environment for users to conduct their online activities.

Another notable technology integrated into the BIPAC-5100S is its user-friendly web interface, which simplifies setup and configuration. Users can easily manage their network settings, monitor traffic, and troubleshoot issues through a well-organized dashboard. Additionally, the router supports remote management, allowing IT personnel to maintain networks without needing to be physically present.

In summary, the Billion Electric BIPAC-5100S router stands out with its robust performance, advanced security features, and versatile connectivity options. Whether for business or personal use, this router is designed to meet the evolving needs of users, making it a reliable choice in today's increasingly digital world.
Top Page Image Contents