DHCP server enabled with 100 client IP addresses starting from 192.168.1.100. These parameters should work for the majority of installations. If your ISP gives you explicit DNS server address(es), read the embedded web configurator help regarding what fields need to be configured.

4.4.2 IP Address and Subnet Mask

Refer to the IP Address and Subnet Mask section in the Wizard Setup chapter for this information.

4.4.3 RIP Setup

RIP (Routing Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction field controls the sending and receiving of RIP packets. When set to:

1.Both - the BIPAC-5100S will broadcast its routing table periodically and incorporate the RIP information that it receives.

2.In Only - the BIPAC-5100S will not send any RIP packets but will accept all RIP packets received.

3.Out Only - the BIPAC-5100S will send out RIP packets but will not accept any RIP packets received.

4.None - the BIPAC-5100S will not send any RIP packets and will ignore any RIP packets received.

The Version field controls the format and the broadcasting method of the RIP packets that the BIPAC-5100S sends (it recognizes both formats when receiving). RIP-1 is universally supported; but RIP-2 carries more information. RIP-1 is probably adequate for most networks, unless you have an unusual network topology.

Both RIP-2B and RIP-2M sends the routing data in RIP-2 format; the difference being that RIP-2B uses subnet broadcasting while RIP-2M uses multicasting.

4.4.4 Multicast

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of hosts on the network - not everybody and not just 1.

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. IGMP version 2 (RFC 2236) is an improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If you would like to read more detailed information about interoperability between IGMP version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class D IP address is used to identify host groups and can be in the range 224.0.0.0 to 239.255.255.255. The address

224.0.0.0is not assigned to any group and is used by IP multicast computers. The address

224.0.0.1is used for query messages and is assigned to the permanent group of all IP hosts (including gateways). All hosts must join the 224.0.0.1 group in order to participate in IGMP.

26

Page 26
Image 26
Billion Electric Company BIPAC-5100S user manual RIP Setup, Multicast

BIPAC-5100S specifications

Billion Electric Company, a global leader in broadband and energy management solutions, has developed the BIPAC-5100S, a powerful and versatile router that meets the demands of small to medium enterprises as well as home users. This device combines high-performance networking capabilities with advanced features designed to enhance connectivity and productivity.

One of the standout characteristics of the BIPAC-5100S is its support for a variety of connectivity options, including IPv4 and IPv6 support, which ensures compatibility with current and future networking standards. The router is equipped with a built-in DSL modem, allowing users to connect directly to DSL services while also supporting Ethernet WAN connectivity for flexible Internet service options. This dual capability makes it an ideal choice for users looking for adaptability in their networking solutions.

Performance-wise, the BIPAC-5100S is powered by a high-speed processor and features multiple Ethernet ports to facilitate wired connections for devices like computers, printers, and servers. With support for speeds up to 300 Mbps, this router is designed to deliver seamless streaming, online gaming, and fast downloads. The advanced Quality of Service (QoS) feature allows users to prioritize bandwidth for specific applications, ensuring that critical services receive the necessary resources for uninterrupted operation.

Security is paramount in any networking device, and Billion Electric enhances this aspect in the BIPAC-5100S. The router includes various security protocols such as WPA/WPA2 encryption, firewall protection, and VPN passthrough capabilities. These features protect the network from unwanted intrusions and provide a safe environment for users to conduct their online activities.

Another notable technology integrated into the BIPAC-5100S is its user-friendly web interface, which simplifies setup and configuration. Users can easily manage their network settings, monitor traffic, and troubleshoot issues through a well-organized dashboard. Additionally, the router supports remote management, allowing IT personnel to maintain networks without needing to be physically present.

In summary, the Billion Electric BIPAC-5100S router stands out with its robust performance, advanced security features, and versatile connectivity options. Whether for business or personal use, this router is designed to meet the evolving needs of users, making it a reliable choice in today's increasingly digital world.