Billion Electric Company BIPAC-5100S user manual Dhcp

If you want to change your BIPAC-5100S LAN settings, click Change LAN Configuration to display the screen as shown next.

The following table describes the labels in this screen.

LABEL	DESCRIPTION
LAN IP Address	Enter the IP address of your BIPAC-5100S in dotted decimal notation, for example,
	192.168.1.254 (factory default).
LAN Subnet Mask	Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server	From the DHCP Server drop-down list box, select On to allow your BIPAC-5100S to
	assign IP addresses, an IP default gateway and DNS servers to computer systems
	that support the DHCP client. Select Off to disable DHCP server.
	When DHCP server is used, set the following items:
Client IP Pool	This field specifies the first of the contiguous addresses in the IP address pool.
Starting Address
Size of Client IP	This field specifies the size or count of the IP address pool.
Pool
Primary DNS	Enter the IP addresses of the DNS servers. The DNS servers are passed to the
Server	DHCP clients along with the IP address and the subnet mask.
Secondary DNS	As above.
Server
Back	Click Back to go back to the first wizard screen.
Finish	Click Finish to save the settings and proceed to the next wizard screen.

22