Billion Electric Company BIPAC-7500G user manual Wireless, ESSID Broadcast

Billion BIPAC-7500G–802.11g ADSL VPN Firewall Router with 3DES Accelerator

Wireless

WLAN Service: Default setting is set to Enable.

Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b + g.

Nitro Mode: Default is enabled for increasing performance in mixed 802.11b and 802.11g wireless networks.

ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the router’s wireless interface. To connect to this device, your wireless clients must have the same ESSID as the device.

ESSID Broadcast:

Disable: Any client that using the “any” setting cannot discover the Access Point (AP) in question.

Enable: Any client that using the “any” setting can discover the Access Point (AP) in question.

Regulation Domain: There are five Regulation Domains for you to choose from, including North America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.

Channel ID: Select the ID channel that you would like to use.

Reset: Reset the Access Point (AP), which is already built-in to the router’s wireless interface.

Connected: true or false. That it is the connection status between the system and the build-in wireless card.

AP Firmware Version: The Access Point firmware version.

28

Chapter 4: Configuration