Billion BiGuard VPN Client
« no keystate » error
115305 Default sysdep_app_open: Init Connection for :
115305 Default sysdep_app_open: IPV4_SUBNET Network 192.168.1.1
115305 Default sysdep_app_open: IPV4_SUBNET Netmask 255.255.255.0 115315 Default (SA
115317 Default (SA
115319 Default (SA
If you have an « no keystate » error, check if the preshared key is correct or if the local ID is correct (see « Advanced » button). You should have more information in the remote endpoint logs.
« received remote ID other than expected » error
120343 | Default sysdep_app_open: | Init Connection for : | ||||
120343 | Default sysdep_app_open: | IPV4_SUBNET Network 192.168.1.1 | ||||
120343 | Default sysdep_app_open: | IPV4_SUBNET Netmask 255.255.255.0 | ||||
120348 | Default (SA | phase | 1 Main Mode | [SA][VID] [SA][VID] | ||
120349 | Default (SA | phase | 1 Main Mode | [KEY][NONCE] | ||
120349 | Default (SA | SEND | phase | 1 Main Mode | ||
120351 | Default (SA | RECV | phase | 1 | Main Mode | [KEY][NONCE] |
120351 | Default (SA | SEND | phase | 1 | Main Mode | [ID][HASH][NOTIFY] |
120351 | Default (SA | RECV phase | 1 | Main Mode | [ID][HASH][NOTIFY] | |
120351 | Default ike_phase_1_recv_ID: |
| received | remote ID other than expected |
The " Remote ID " value (see " Advanced " Button) does not match what the remote endpoint is expected.
« NO PROPOSAL CHOSEN » error
115905 Default sysdep_app_open: Init Connection for :
115905 Default sysdep_app_open: IPV4_SUBNET Network 192.168.1.1
115905 Default sysdep_app_open: IPV4_SUBNET Netmask 255.255.255.0 115911 Default (SA
115913 Default (SA
115915 Default (SA
115915 Default phase 1 done: initiator id c364cd70: 195.100.205.112, responder id
c364cd72: 195.100.205.114, src: 195.100.205.112 dst: 195.100.205.114
115915 Default (SA
115915 Default
If you have an « NO PROPOSAL CHOSEN » error, check that the « Phase 2 » encryption algorithms are the same on each side of the VPN Tunnel.
Check « Phase 1 » algorithms if you have this:
35
Chapter 5: Troubleshooting