MV650SPH
4.Attach upper handle brace to lower handle using corresponding hardware. Then repeat this step on the other side.
- Two 1/2” wrenches.
5.Attach rod end (164) to the nozzle door rod then secure in place by tightening jam nut.
6.Attach nozzle door rod to the nozzle door using corresponding hardware.
NOTE: It is easier to do this with nozzle door closed.
- Two 9/16” wrenches.
7.Attach rod end to rod (as in step 5).
8.Attach nozzle door rod to the lever with nozzle door closed and lever in hose kit position.
NOTE: Check to see nozzle door open and close all the way (see page 15). Tighten or loosen the rod end (164) for any adjustments.
9. Install cable ty wraps.
HERE
10.Reconnect spark plug wire.
11.Attach the bag.
Two 9/16” wrenches.
HERE
Form No F082206A | 11 | Part No 840099 |
