FIG. 10
15.MAINTENANCE AND STORAGE
!All operations on the machine must be carried out exclusively by authorized personnel.
!Always switch off the engine when checking, adjusting or servicing the ma- chine.
!Allow the machine to cool down before inspection.
!The cover ( Fig. 1 ref. F) must always be correctly installed and intact. If it be- comes damaged, have it repaired before the machine is used again.
!Make sure that all the guards of rotating and moving parts are in place.
!For greater safety, when replacing the blade replace all the fixing screws and nuts at the same time, as described in section 14, point D.
!Inspect the fuel lines. These should be replaced if damaged or after a maxi- mum of three years, along with the fixing bands. Old lines may leak fuel.
!Check and regularly adjust the forward clutch control, blade clutch control, and accelerator.
!Cover the machine with a sheet after the engine and silencer have cooled down.
!It is strictly forbidden to place/leave unattended on the sod cutter any potentially dangerous objects which may put the safety of persons or the machine at risk.
!Keep the machine in a good, clean state; do not leave it outside exposed to in- clement weather conditions.
!After use store the machine in a place where children have no access. Always allow the machine to cool down before putting it away.
370310 | F112003A |
| 24 |
