Installation and Set-up
1/ Choose a suitable site for the base unit (see page 5)
2/ Connect the mains power lead and the telephone line cord into the base unit
Plug one end of the telephone line
cord into the jack on the back of the base (the other end will plug into the telephone wall socket later)
See the note on page 5
3/ Plug the mains adaptor into your wall socket. If you have one or more charger pods, plug the mains adaptors accordingly
Make sure that the 230VAC, 50hz mains socket is switched OFF when you plug the mains adapter into the socket.
See the note on page 5
4/ Connect the base unit to the telephone line
Insert the telephone line plug into the socket then switch mains power back ON.
Make sure the mains socket is switched on — the phone won’t work without electrical power
Binatone Help Line : 0845 345 9677 | 6 |
