![](/images/new-backgrounds/1295184/29518451x1.webp)
4. Press the DOWN button to select a base number (BASE 1, 2,3 or 4) 5. Press the MENU/OK button to see "PIN ?"
Key in the 4 digit PIN code for the base - the CC2300 default PIN code is 0000
6. Press the MENU/OK button to confirm, and the display will flash "SEARCHING 1" (or 2,3,4)
7. At the same time, on the base, press the MENU/OK button to see
"PHONEBOOK"
8. Press the UP button tweice to see "REGISTRATION"
9. Press the MENU/OK button to see "SEARCHING" flash on base display
After a short delay, if the registration is successful, there will be a confirmation beep, and the Handset display will go back to idle mode with number shown (e.g. HS1, HS2). The base display will also go back to idle mode.
To de-register a handset
You may need to do this if you need to replace a faulty handset. Call the Binatone help line if you need more advice.
To
With the base in idle mode:
1. Press the MENU/OK button to see "PHONEBOOK"
2 .Press the DOWN button twice to see "SETTINGS"
3. Press the MENU/OK button to see "DELETE HS"
4. Press the MENU/OK button to see " HS 1 " (or 2,3, 4)
Press UP or DOWN button to select the handset you want to
5. Press the MENU/OK button to confirm, and the selected handset will be
will show "UNREGISTERED".)
*Press the PHONEBOOK/BACK button to return to the previous menu at any time.
Note: Handsets can also be
Binatone Help Line : 0845 345 9677 | 24 |