How to use this guide
This User’s Guide has been designed to help you get the utmost satisfaction from your Go Vac Rechargeable Cordless Sweeper. Enclosed you’ll find assembly instructions, tips for all cleaning tasks, safety precautions, plus maintenance and troubleshooting instructions.
Please read this Guide thoroughly before using your Go Vac. Pay particular attention to the parts diagram, assembly instructions, and part names. Following the Guide will greatly enhance your ability to get the most performance from your Go Vac for many years.
Before you start
Your Go Vac requires very little assembly. Remove it from the box and check it against the illustration to familiarize yourself with the components listed. The exploded view drawing with part names will also be helpful if you should need to order a part at a later time. Remember, components of your Go Vac may vary depending on the model you purchased.
Quick and easy assembly
1. Assemble the Handle by screwing together the three (3) Metal Extension Handles. Place the colored Handle Grip on top of the metal extension assembly and twist clockwise until secure. Screw the
2. Place bottom
3. Position Go Vac in Charging Base (if so equipped), making sure that the Go Vac Charging Port fits securely over the Electrical Contact Post on the Charging Base.
4. Plug the Charging Base cord into a standard electrical outlet. The Indicator Light will glow red, showing that the unit is charging.
NOTE: If you purchased Model 3301, the Charging Base is replaced by a Charging Cord with Transformer Plug. The Transformer plugs into standard electrical outlet
WARNING:
Electric/electronic appliances should not be subjected to extreme temperatures or high humidity. Do not store your Go Vac in bathing areas or close to stoves, furnaces or radiators.
Tip:
Fully charge unit before using. (See Charging the battery, page 6.
Model 3301 Charging Cord with Transformer Plug
Plug into Port on the Motor side of your Go Vac
4
