Operations (continued)
Power cord usage
1.To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there are two quick release cord wraps for easy cord removal. There is also a cord clip that is part of the upper cord wrap where you can attach the cord when vacuuming.
2.When you are finished cleaning, turn vacuum cleaner off.
3.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.
4.Loop power cord around cord wraps on rear of vacuum cleaner. Be sure to first return the quick release cord wraps back to their original position before wrapping the cord.
5.Clip molded plug to power cord to secure.
Quick Release Cord Wrap
Maintenance and care
To maximize your cleaning performance and extend the life of your vacuum, it is very important that you empty your dirt container and check and clean your filters frequently. Perform the following maintenance steps:
1.Empty the dirt container when the dirt reaches the “Full” line on the container, or more frequently to prevent overfills. For best performance, empty after each use.
2.Check the
NOTE: Be sure to clean or replace your filters anytime the air flow indicator (select models only) begins to turn red.
3.Replace the
NOTE: More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.
WARNING:
To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
Tip:
To maximize cleaning performance, check and clean or replace all filters as suggested.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 11 |
8/18/06 | 4:49:26 PM |
