Operations (continued)
Transporting cleaner
1.
1.To move your cleaner from room to room,
put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
2. The cleaner can also be moved by using the carry handle.
Air flow indicator
The air flow Indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The air flow indicator will remain green while the unit is running until the airflow is reduced by a clog or dirty filter. At that time, it begins to change to red or black. When it is fully red, the airflow is significantly reduced or clogged by a dirty filter. Follow the steps on page 11 to clean your filters. All filters in the vacuum should be cleaned or replaced when the air flow indicator turns red.
If the indicator turns black, it means you have a clog in your hose. To check and remove the clog, remove the hose from the unit by turning the Twist ‘n Snap hose to the right. Try to visually locate the clog. Once you have done this, use a blunt long object such as a broom handle to loosen and remove the debris. Once this is completed, reassemble the hose to the unit,
If the indicator remains red or black with the vacuum running, follow the steps on page 15 to check for and clear clogs.
NOTE: When your vacuum is turned off, the air flow indicator will go to the red color setting. The air flow indicator only detects reductions in airflow when the vacuum power is on.
2a.2b.
right way to carry wrong way to carry
Air Flow
Indicator
NOTICE:
While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.
8 w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
8/18/06 4:49:24 PM
