Bissell 6393 warranty Operations continued, Height adjustment, Brush roll ON/Off pedal, Bare Floor

Operations (continued)

Height adjustment 1.

The powerfoot/rotating floor brush on your vacuum can be adjusted to clean several floor surfaces.

NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

1.Press on the height adjustment foot pedal for the desired setting.

1	Bare Floor	For non-carpeted,
		indoor surfaces
2-3	Lowest Setting	For short pile carpets
4-5	Medium Setting For short and
		medium pile carpets
6-7	Highest Setting	For plush pile carpet

Brush roll ON/Off pedal

Your Total Floors Velocity vacuum has a special feature that allows you the ability to turn the brush roll off when cleaning bare floors and other delicate floor surfaces. This convenient foot-activated pedal is on the side of the foot. Simply press the pedal to stop the brush roll from spinning. When doing normal carpet cleaning, step on the pedal to engage the brush roll for a more thorough cleaning.

ScatterShield™ Debris Guard

The patented ScatterShield is located underneath the foot of the unit and acts as a debris guard when cleaning bare floor surfaces. The rubber shield floats when used on carpet, but will provide superior bare floor cleaning by preventing debris from scattering underneath the foot of the unit.

w w w . b i s s e l l . c o m

ug603-2312_3990_806.indd 7

8 0 0 . 2 3 7 . 7 6 9 1	7
8/18/06	4:49:24 PM