Mitsubishi Electronics HS-U448 Advanced Features, Advanced Playback Controls, Special effects

Advanced Features

Advanced Playback Controls

Special effects

You can use FF and REW on the front panel, or the I\and ^I on the remote to control the playback speed of the tape.

Using the FF and REW on the front panel to control the playback speed

1While the VCR is playing a tape, press PAUSE to freeze the picture.

2Press the FF or REW on the front panel. Each press of FF changes the playback speed by one step in the forward direction. Each press of REW changes the speed by one step in the reverse direction. (See the chart below.)

3 To resume normal playback, press PLAY.

Using the I\ and ^I on the remote to control the playback speed

1	2	3
4	5	6	INDEX
7	8	9
	0

REW FF

1 While the VCR is playing a tape, press I\ or ^I on the remote control. Each press of ^I changes the playback speed by one step in the forward direction. Each press of I\ changes the speed by one step in the reverse direction. (See the chart below.)

2To resume normal playback, press PLAY.

After about 5 minutes in the still or slow-motion mode, the VCR will automatically stop to avoid damage to the tape. The picture may vibrate vertically when you pause the VCRÕs picture.

Press REW on the front panel	High speed search
or \ on the remote control	Speed search
	Fast playback
	Playback
	1/5 slow-motion playback
1/10 slow-motion playback
1/30 slow-motion playback
	Still
1/30 reverse slow-motion playback
1/10 reverse slow-motion playback
1/5 reverse slow-motion playback
Reverse playback
Reverse fast playback	Press FF on the front panel
Reverse speed search
	or ^on the remote control
Reverse high speed search

Still adjustment

Sometimes during still frame, the picture may vibrate or shake. To correct this problem, press CHANNEL on the front panel until the vibration is reduced or stops. Side-to-side vibration cannot be corrected.

CHANNEL

32