Bissell 67E2 warranty Power button, Motorized powerhead, Variable suction power control

Operations

Power button

Turn the power on or off by pressing lightly downward on the power button ( ).

Power Button

Motorized powerhead

Set the power switch on the handle to 1 for rotating brush or 0 to turn rotating brush off.

NOTE: The power brush will auto- matically turn off if the telescopic tube is in an upright position to pro- tect your carpet from potential dam- age caused by the rotation of the power brush.

NOTE: The power brush will auto- matically turn off if the rotator bar is blocked by clogs (hair, cloth, ect.) for your protection. In that case, turn off the power head, unplug the vac- uum, clean the clog, and re-start the power brush.

Variable suction power control

The variable suction power control is located on the top of the handle. Slide the control toward the larger dots for maximum suction. Slide the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.

Variable height adjustments

Step on the brush height adjuster located on the right side of the motor- ized powerhead to adjust for flooring type (lowest setting (1)for non-carpet, indoor areas, highest setting (6) for plush pile carpet).

Variable

Suction

Control

PowerBrush

On/Off

caution:

Before using your vacuum, make sure that the dust bag and all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without the dust bag and filters.

8 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1